Custom 450 XM-25 UNS S45000 Alloy 450 Forged Steel for Power, Nuclear, Chemical ASTM A564 AMS 5773E Rolled Rings, Bars & Discs Jiangsu Liangyi

Product Description

Jiangsu Liangyi is an ISO 9001:2015-certified stainless steel forging manufacturer in China, supplying Custom 450 / XM-25 / UNS S45000 / Alloy 450 forged steel open-die forgings and seamless rolled rings to power-generation, nuclear, chemical, aerospace and fluid-handling projects in India and worldwide, all to ASTM A564 (XM-25) and AMS 5773E.

Why Custom 450 / XM-25 / UNS S45000 for Indian power, nuclear and chemical projects

Custom 450 / Alloy 450 is a martensitic age-hardenable stainless with corrosion resistance equal to AISI 304 (from 1416% Cr and 67% Ni) and high toughness (Charpy 68 J well above 17-4PH) plus strength to 1210 MPa. For India's thermal and nuclear power, refinery and chemical-process duty, that combination of corrosion resistance and toughness suits turbine rings, boiler tube sheets, pressure-vessel rings, pump and valve parts where a tougher, more corrosion-resistant PH grade than 17-4PH is needed.

Documented deliveries

Power (Europe): Custom 450 turbine guide and seal rings for a gas power plant three years' service, good high-temperature corrosion resistance, 20% lower maintenance.

Power (thermal): XM-25 boiler tube sheets and nozzles tensile to 1150 MPa, passed third-party NDT with full traceability.

Nuclear (Middle East): Alloy 450 seamless rolled rings for pressure-vessel use ASTM E45 Method D cleanliness, ASTM No. 4 grain size, safe stable service.

Chemical (Southeast Asia): XM-25 valve bodies and stems 1.5 the service life of standard stainless in strong acid-base service.

Aerospace (global): Custom 450 hollow bars for structural connectors AMS 5773E, Charpy to 85 J.

Product range for Indian buyers

Round, square, flat and rectangular bars; seamless rolled rings (guide, seal, casing); turbine blades, disks, impellers, blisks; pump cases, impellers, wear rings, shafts; valve bodies, bonnets, stems, discs; discs, blocks, plates, tube sheets, nozzles; pipes, tubes and casings; fully custom open-die forgings (30 kg30,000 kg).

Material data

Chemistry (wt%): Cr 14.0016.00 Ni 6.007.00 Mo 0.501.00 Cu 1.251.75 Nb 0.300.50 C 0.0250.050 Fe bal. Properties (AMS 5773E): Rm 9651210 MPa, Rp0.2 830 MPa, A 16%, RA 50%, hardness 302363 HB, Charpy 68 J. Heat treatment: solution 1040 C + single-step aging 575 C.

Standards & quality

Manufactured to ASTM A564 (XM-25) and AMS 5773E under an ISO 9001:2015 quality system; EAF + ESR/VAR dual-melt; ASTM E45 Method D cleanliness; ASTM No. 5 or finer grain. Full inspection report per order with heat number, heat-treatment curve, NDT and traceability; third-party inspection on request. Custom 450, XM-25, UNS S45000 and Alloy 450 are the same grade (American grade; no direct EN number nearest comparable 1.4542 / 1.4594).

Commercial & logistics

Lead time 24 weeks (standard) / 46 weeks (fully custom); rush orders accepted; delivery to Indian ports including Nhava Sheva, Mundra, Chennai, Kandla and Visakhapatnam by sea, air or express. Producing Custom 450 since 1997; 20+ countries.

Custom 450 / XM-25 advantages for Indian projects

Compared with 17-4PH, Custom 450 / UNS S45000 offers corrosion resistance equal to 304 stainless and roughly 2.5 the impact toughness (Charpy 68 J vs 27 J), which matters for nuclear pressure parts, chemical-process equipment and power-plant components exposed to corrosive, high-stress service. Its single-step aging keeps cost and lead time down, and its good machinability in both annealed and aged states suits Indian fabricators finishing parts in-country. Beyond power and nuclear, the grade serves chemical (corrosion-resistant structural parts and housings), aerospace (structural connectors, high-strength fasteners) and pulp & paper (corrosion-resistant rolls) all sectors active in the Indian market.

Production strength

Jiangsu Liangyi melts Custom 450 / Alloy 450 via EAF plus ESR or VAR for ASTM E45 Method D cleanliness and ASTM No. 5 (or finer) grain, and forges single pieces from 30 kg to 30,000 kg with 120,000 t/year capacity covering prototypes through volume orders and large rings.

Enquire with Jiangsu Liangyi: sales@jnmtforgedparts.com +86-13585067993 Jiangyin, Jiangsu Province, China.

Jiangsu Liangyi is an independent manufacturer; grade and standard names indicate the material and specifications supplied.