FV520B W.Nr. 1.4594 X5CrNiMoCuNb14-5 Forged Steel for Power, Oil & Gas, Marine AMS 5773E Turbine Blades, Rolled Rings & Bars Jiangsu Liangyi

Product Description

Jiangsu Liangyi is an ISO 9001:2015-certified stainless steel forging manufacturer in China, supplying FV520B / W.Nr. 1.4594 / X5CrNiMoCuNb14-5 forged steel seamless rolled rings, turbine blades, bars, discs and custom forgings to power-generation, oil & gas, marine, pump, valve and aerospace projects in India and worldwide, all to AMS 5773E.

Why FV520B / 1.4594 for Indian power, oil & gas and marine projects

FV520B / X5CrNiMoCuNb14-5 is a martensitic precipitation-hardening stainless (13Cr-6Ni-2Mo-2Cu-Nb) with corrosion resistance comparable to 304 stainless and clearly better pitting and intergranular resistance than 17-4PH, plus high strength (Rm 9251090 MPa, yield 800 MPa). For Indian thermal and combined-cycle power, refinery and offshore duty, FV520B / 1.4594 is a strong fit for turbine blades, pump and valve parts and marine components where 17-4PH would be only marginal in chloride service.

Documented deliveries

Power generation (Europe): FV520B / 1.4594 turbine blades and seamless rolled rings for 600 MW steam turbines three years, zero wear, deformation or corrosion.

Oil & gas (Middle East): FV520B pump and valve parts for an offshore oilfield zero failures in two years of seawater / crude exposure.

Marine (Japan): FV520B seamless rolled rings and high-strength fasteners for offshore drilling platforms minimal rusting after four years of marine service.

Aerospace (Southeast Asia): FV520B fasteners and turbine parts for an aerospace MRO, to AMS 5773E.

Product range for Indian buyers

Round, square, flat and hollow bars; seamless rolled rings (guide, seal, labyrinth, casing); turbine blades, impellers, disks, blisks; pump bodies, impellers, wear rings, shafts; valve bodies, bonnets, stems, seat rings; discs, blocks, plates, tube sheets, nozzles and flanges; pipes, tubes and casings.

Material data (per AMS 5773E)

Chemistry (wt%): Cr 13.2014.70 Ni 5.006.00 Mo 1.202.00 Cu 1.202.00 Nb 0.200.70 C 0.07 Fe bal. Properties: Rm 9251090 MPa, Rp0.2 800 MPa, A 15%, hardness 274341 HBW, Charpy 55 J. Heat treatment: solution 1050 C + double precipitation 750 C / 550 C.

Standards & quality

Manufactured to AMS 5773E under an ISO 9001:2015 quality system; melted via EAF + ESR/VAR; EN 10204 3.1 / 3.2 mill test reports per shipment; SGS / BV / TV third-party inspection on request. FV520B and W.Nr. 1.4594 / X5CrNiMoCuNb14-5 are the same grade Jiangsu Liangyi certifies to AMS 5773E and EN documentation.

Commercial & logistics

Lead time 410 weeks (standard) / 814 weeks (fully custom); common bar stock for urgent orders; FOB / CIF / EXW with delivery to Indian ports including Nhava Sheva, Mundra, Chennai, Kandla and Visakhapatnam; pricing in USD / EUR / GBP / CNY.

FV520B / 1.4594 advantages for Indian projects

Compared with 17-4PH, FV520B / X5CrNiMoCuNb14-5 offers superior pitting and intergranular corrosion resistance and is highly recommended for marine and offshore service, where 17-4PH is limited in chloride environments a key advantage for India's coastal power, refinery and offshore wind/oil projects. Its 2% Mo + 2% Cu on a 13Cr-6Ni base gives 304-class corrosion resistance with high strength, and its good weldability suits fabricated and repair-welded turbine and pump assemblies. For power generation specifically, Jiangsu Liangyi has a long record in FV520B turbine blades, impellers and seamless rolled guide/seal rings produced under semi-automatic, AMS 5773E-controlled heat treatment for batch-to-batch consistency.

Production strength

Jiangsu Liangyi melts FV520B / 1.4594 via a 60 t EAF with ladle-furnace and VD/VOD degassing plus ESR/VAR remelting for purity, and forges on open-die presses up to 6000 t supporting both prototype and volume orders, and large-section rings and turbine forgings.

Enquire with Jiangsu Liangyi: sales@jnmtforgedparts.com +86-13585067993 Jiangyin, Jiangsu Province, China.

Jiangsu Liangyi is an independent manufacturer; grade and standard names indicate the material and specifications supplied.